null

How do I adjust the Motion Activation feature on my Ronin Series Red Dot?

Use easy-to-follow instructions to activate or deactivate the Motion Activation settings for the Ronin P10, P11, P12, & V10 Red Dot Sights.

Activated by motion-sensing technology, the red dot sight will power up when it senses the required motion.

 

To ADJUST the Motion Activation setting: Press and hold the (-) button until the dot blinks off. Release the button once the objective is clear of the dot

 

To ENABLE: Press the (+) button. The dot will blink three times for verification.

To DISABLE: Press the (-) button. The dot will blink two times for verification.

 

NOTE: If MOTION ACTIVATION is disabled, you will need to manually turn the unit ON as it will no longer detect motion to activate the red dot sight.

 

To SAVE AND EXIT: Press and hold the (-) button until the dot blinks back on and remains on, then release the button.

 

 

 

 

How do I adjust the Auto-Shutoff time on my Red Dot Sight?

Use easy-to-follow instructions to adjust the Auto-Shutoff time settings for the Ronin P10, P11, P12, & V10 Red Dot Sights.

The Auto-Shutoff feature will automatically deactivate when left static for the set duration of time. You can set the shutoff time from 1-12 hours or turn the mode off completely. When you first receive the red dot sight, it may be factory set for four hours.

 

To ADJUST the Auto-Shutoff time duration: Press and hold the (+) button until the dot blinks off. Release the button once the objective is clear of the dot.

 

When pressing the buttons, pay close attention to the number of times the dot blinks. The number of blinks will indicate the number of hours from 1-12. Auto-Shutoff can also be disabled and is in the “0” position before the 1-hour setting.

 

To INCREASE the hour: Press the (+) button 

 

To DECREASE the hour: Press the (-) button

 

To DISABLE Auto-Shutoff: Press the (-) at the 1-hour setting, entering the “0” position. The dot will rapidly blink five times for verification.

 

NOTE: If AUTO-SHUTOFF is disabled, you will need to manually turn the unit OFF as it will no longer shut off automatically.

 

To SAVE AND EXIT: Press and hold the (+) button until the dot blinks back on and remains on, then release the button.