The Basics
Activation / Deactivation
To ACTIVATE: Press either the (+) or (-) button.
Note: If MOTION ACTIVATION is enabled, you do not need to press any of the buttons to activate the red dot sight. The motion activation sensor will detect the movement and power up the unit.
To DEACTIVATE: Press the (+) and (-) buttons simultaneously.
Illumination Adjustment
To INCREASE the brightness: Press the (+) button.
To DECREASE the brightness: Press the (-) button.
Feature Adjustment
Before modifying any of the features, ACTIVATE the red dot sight. You will also need to look through the objective lens as you will need to see the dot blink, as this visually displays which setting you are selecting.
Auto-Shutoff
The Auto-Shutoff feature will automatically deactivate when left static for the set duration of time. You can set the shutoff time from 1-12 hours or turn the mode off completely. When you first receive the red dot sight, it may be factory set for four hours. When adjusting the settings, pay close attention to the number of times the dot blinks. The number of blinks will indicate the number of hours from 1-12. Auto-Shutoff can also be disabled and is in the “0” position before the 1-hour setting.
Auto-Shutoff Settings
To adjust the Auto-Shutoff time duration: Press and hold the (+) button until the dot blinks off. Release the button once the objective is clear of the dot.
To INCREASE the hour: Press the (+) button
To DECREASE the hour: Press the (-) button
To DISABLE Auto-Shutoff: Press the (-) at the 1-hour setting, entering the “0” position. The dot will rapidly blink five times for verification.
To SAVE AND EXIT: Press and hold the (+) button until the dot blinks back on and remains on, then release the button.
NOTE: If AUTO-SHUTOFF is disabled, you will need to manually turn the unit OFF as it will no longer shut off automatically.
Motion Activation
With the innovation of motion-sensing technology, the red dot sight will power up when it senses the required motion.
Motion Activation Settings
To adjust the Motion Activation setting: Press and hold the (-) button until the dot blinks off. Release the button once the objective is clear of the dot.
To ENABLE: Press the (+) button. The dot will blink three times for verification.
To DISABLE: Press the (-) button. The dot will blink two times for verification.
To SAVE AND EXIT: Press and hold the (-) button until the dot blinks back on and remains on, then release the button.
NOTE: If MOTION ACTIVATION is disabled, you will need to manually turn the unit ON as it will no longer detect motion to activate the red dot sight.
Before sending your Northtac product in for warranty service, please try the following troubleshooting options. If you feel your Northtac product needs warranty service or evaluation, visit the shipping and returns page for our return procedure.